Site Overlay

D-LINK SECURICAM DCS-2100 DRIVER

Click No to exit the installation. From each tab, different elements of the DCS can be configured. They can have multiple selections. Once the alert, caused by motion detection or a digital input level change is triggered, the alert message will be shown in this window. Select a program folder to install the application software and then click Next, which is shown in the figure below. A hardware reset of the Internet Camera may be required if the Installation Wizard cannot find the camera. This might be caused by network firewall protection.

Uploader: Nerisar
Date Added: 24 October 2012
File Size: 36.13 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 29187
Price: Free* [*Free Regsitration Required]

Solvusoft: Microsoft Gold Certified Company

This will allow you to rearrange the cameras dcx-2100 an order of your choice. Reset And Restore There is a button hidden in the pinhole beside ccs-2100 Ethernet socket. Highlight the camera that you want to delete from the list and click on the Delete button. This section of the manual will deal with using the Internet Camera in two parts: Select the weekdays you would like to record and enter the The Functionalities of Configuration Components The four main parts of the scheduler have been briefly described above.

Please wait while Setup configures the components. Using IP surveillance Software continued Scheduling continued The scheduler will not be accessible until at least one camera has been added to the camera list.

Using IP surveillance Software continued Playback Program continued Normal Single Frame Mode While in the normal single frame display mode, you can change the video currently displayed dc-2100 Currently only change password is implemented. If you want to access the histogram area, you must change the area selection indicator to the histogram area. The video channel is not connected with any DCS yet.

  FUJITSU V5545 DRIVER

D-link SECURICAM DCS-2100 User Manual

The D-Link DI is used as an example to clarify the configuration process. The Layout and Functionalities Introduction The layout of the scheduler and its components, shown below, will be described.

Using IP surveillance Software continued Monitor Program continued Not configured channel Selected Channel Recording Connected and monitoring Configured but not connected no video Trashcan If you do not want to monitor one video, you can drag and drop the video in the video area to the trashcan in the common control area of the monitor program. Autorun at Startup Users can select whether or not to autorun Launcher when Securkcam boots up.

There is a button hidden in the pinhole beside the Ethernet socket.

Restore button to recall the original settings. Local FTP server port: It supports rotational focus control so the lens can be adjusted to focus under normal and stable conditions to maximize the image quality of the Internet Camera. Securicaam the channel that is the same as the other wireless devices on your network. Click No to exit the installation.

The Layout And Functionalities Using IP surveillance Software continued Scheduling continued The scheduler will not be accessible until at least one camera has been added to the camera list. Snapshots begin at – Set the time to start operations.

  GEOVISION GV-1480 DRIVER DOWNLOAD

These settings can be configured in your Web browser and while logged into the IP surveillance Program.

The location name is the same as the camera name text on video unless you have specified otherwise. Stop Alert Sound If an alert is triggered, the alert sound will start to play. The location name is the same as the camera name text on video unless you have specified otherwise.

If the system still has problems dd-link reset, restore the factory settings and install again: Image Brightness, Contrast, Saturation and Hue are all adjusted in the same manner.

Wireless internet camera with 3g mobile video support pages. Window Name – The text entered here will show at the top of the motion window.

D-LINK SECURICAM DCS+ MANUAL Pdf Download.

Enter a Camera Name and create a Root password for the camera. This button allows you to load pre-edited schedules from the scheduling directory for the selected video channel.

Table of Contents R-link to my manuals Add.

Monitor Starts up the Monitor program. If the firmware is older than that currently on the camera, a screen will appear indicating so and prompting the user to confirm the upload.

© 2020 All rights reserved